Plumbing Services

How to Tell If You Have a Plumbing Leak

A plumbing leak can cause a lot of problems for homeowners. They can lead to water damage, mold growth, and high water bills.

It is important to detect a leaky pipe early to fix it quickly. There are a few ways to do this, including checking the water meter. Click here to Learn More.


One of the first indicators that you leak is when you notice an increase in your water bill. Water leaks aren’t a cheap problem to ignore, and if they are left unchecked, they can lead to water damage that requires costly repair and cleaning services. But the good news is that you can often catch these leaks early on by checking your water meter for signs of a leak.

Water meters are designed to help you check on your water usage so that you know whether you have a leak in your plumbing system or if there’s a billing issue with your utility provider. A simple inspection of your meter can tell you what the problem is, and it’s much cheaper than calling in a plumber for an investigation.

The first step is to make sure that all of the water use sources in your home are turned off. This includes faucets, ice makers, dishwashers and washing machines. You should also shut off the water to your showers and any tubs that you have. Once you’ve made sure that all of the water is off, you can go to your water meter and look at the dials. You should be able to see a small pinwheel with black and silver stripes or a triangle dial on your water meter that shows whether you’re using any water.

If you notice that the meter is turning even though you’re not using any water, you have a leak somewhere in your house. It could be in the pipes between your meter and your house, or it might be inside the walls. If you can’t find the source of the leak in your house, you can also try examining the yard for soft or muddy areas and water spots that might indicate where a pipe has burst.

Remember, as a homeowner, you are responsible for the lines that run from your house to the water meter. If you do find a leak in these lines, it’s going to be the responsibility of your property owner to fix this problem for you.

We all rely on water to keep us clean, healthy, and comfortable. But, it can quickly become the enemy if it starts to go where it shouldn’t. Leaks can cause significant damage to your home and belongings if you’re not careful. If you notice water stains on the ceiling, walls, or floors in rooms where it doesn’t belong, there’s a good chance that you have a plumbing leak.

It may be difficult to identify at first because of the deceptive sounds that leaking water can make. These sounds can include a scratching or rushing sound that isn’t usually associated with water. It’s important to listen closely when your house is quiet, such as at night time when the traffic outside is minimal and most people are sleeping. The sounds of a leaking pipe can also take on a high-pitched whine or a loud bang.

Another sign of a leak is damp or soft drywall in areas where it shouldn’t be. In some cases, the drywall can even start to rot away. The stale moisture can also create the perfect conditions for mold and mildew to grow in your home. This can be a health hazard, especially for those with allergies or sensitivities. A musty odor in rooms where there isn’t an obvious source is also a good indicator of a hidden leak somewhere.

Increasingly high water bills are one of the most common signs of a leak. A leaky pipe could be guzzling up to 90 gallons of water per day, which can quickly add up. If your water bill has suddenly climbed, it’s a good idea to call in a plumber to investigate and find the source of the leak.

In addition to wasting money, water leaks can also lead to other problems in your home. For example, a water leak can create the ideal conditions for the growth of mold and mildew. These spores can spread quickly and can be hard to get rid of. The best way to deal with this issue is to stop the leak as soon as possible, and to have any damaged drywall or flooring replaced immediately.

While most plumbing leaks occur around toilets, sinks and showerheads, they can also happen behind walls or under the floor. These hidden leaks are particularly dangerous because they go unnoticed for long periods of time and can cause extensive water damage. Fortunately, a little knowledge and quick action can help prevent these hidden disasters.

When you discover a plumbing leak, the first step is to shut off your home’s water supply. If you can’t find the water valve, turn off your home’s main water line at the breaker box. Once the water is turned off, it’s time to start cleaning up.

You can use a wet vac or mop up the water in the affected area. It’s important to get the area as dry as possible to prevent structural damage to your home and to avoid mold growth.

Once the area is cleaned up, it’s time to dry out the pipes. This involves opening windows, doors and cabinets, running fans and using a dehumidifier to remove the excess moisture. This can take two-to-three days, but it’s necessary to avoid structural damage and unhealthy mold growth.

Leaking pipes can be caused by a number of problems, including corrosion, poor installation or old age. However, a common cause of pipe leaks is sudden temperature changes. These rapid changes cause the expansion and contraction of the piping and can result in cracks or leaks.

If you suspect a pipe leak, have a plumber inspect the area and repair it as soon as possible. A leaky pipe can cause serious water damage and increase your water bills substantially.

Most pipe leaks are easily fixed by a professional plumber, but there are some DIY solutions that can help. One option is to use epoxy putty to seal the area around a leaky pipe. Before applying the putty, make sure that the involved pipes are completely drained and clean. Follow the manufacturer’s instructions to ensure that the putty cures properly. This simple fix will save you money on your utility bills and protect your home from expensive and hazardous mold growth.

Whether it’s a slow drip under the sink or a gushing pipe in your ceiling, you shouldn’t ignore any plumbing problem. A plumber will be able to diagnose and repair the issue before it gets worse.

The first thing you should do when a leak becomes apparent is shut off the water to the fixture. If it’s a serious leak, you should also shut off the water at your house’s main valve. If you aren’t sure where the leak is coming from, a plumber can use a variety of tools to pinpoint it and determine what is causing the leak.

If you have a leak, you should call your plumber as soon as possible to schedule an appointment for a repair. If you can’t afford to wait until the morning, consider calling an emergency plumber who will be available on the weekend or after-hours.

Leaks that cause a significant amount of water damage can be costly, especially if you have to pay for emergency services and replacement parts. They can also lead to serious health problems, such as mold, and can result in a rotting home structure. Having an experienced plumber deal with the problem right away is the best way to minimize the damage and save money.

Even if you have no obvious signs of a leak, it’s always worth checking under sinks, around toilets and behind water-use appliances. A plumber can check for hidden leaks with the help of specialized equipment and can deal with them more quickly and efficiently than you could manage alone.

Plumbing leaks waste a lot of water. A simple drip can add up to tens of gallons each day, which means you’re paying for water that isn’t getting used. The EPA estimates that 10% of homes have leaks that waste 90 gallons or more each day. In addition to wasting water, leaks can cause damage to your property and make it difficult to sell your home. If you think you have a leak, it’s important to act quickly before the problem gets out of hand.

Plumbing Services

Plumbers Are On Call 24 Hours a Day, 7 Days a Week

Plumbers Dunwoody are on call 24/7 to fix the pipes that carry water and waste. Their duties range from repairing leaky faucets to re-piping an entire house. They are known for their manual dexterity and physical strength.

They also interpret blueprints, research regulations, and standards and install or repair a wide variety of fixtures. Plumbers must also have strong customer service skills to explain the work required and obtain customers’ approval for the quoted price.


The water supply system brings freshwater into the home and distributes it to fixtures. This includes the kitchen sink, bathroom shower and bathtub, washing machine, dishwasher, ice maker and more. A plumber can help you choose the right pipes and fittings, such as PVC or PEX, for your home. Then they can install and repair them. You’ll want to keep your home plumbing system in good shape to prevent water leaks and other problems.

The main water line runs from the water company’s meter to your house. Then it branches out to your supply pipes. The main line may also have a shutoff valve before or after the meter to control your water usage. Plumbers use different tools to inspect and work on water supply pipes, including video cameras, pipe cutters, flaring pliers, dies, hydraulic pumps and specialised pipe-joining tools.

Water pipes are usually made from plastic, iron or copper. Copper pipes are popular because they’re durable and don’t change the flavor of your home’s water. However, they’re expensive and require a lot of work to install. Plastic pipes are more affordable, but they can crack or corrode over time. They’re also not as flexible as metal pipes, so they can’t bend easily or fit into tight spaces.

The water lines in your home are under pressure from the water supply system, so they’re more likely to break or burst than drain pipes. Water supply pipes are also more vulnerable to freezing temperatures, so you’ll need to take extra steps to protect them. The most important thing to do is to have a basic understanding of your home’s water supply system and the approved materials for your plumbing pipes. This will help you spot any potential issues and deal with them competently in an emergency. For example, if you notice that your home’s water pressure has dropped significantly, it could indicate that one of your water supply pipes is leaking or blocked. A plumber will be able to fix this problem quickly and effectively. They’ll be able to identify the source of the issue, whether it’s a broken pipe or a faulty water meter.

Drainage is the process of removing water and waste matter from a property. It’s important for keeping your home safe and dry, protecting your foundations, landscaping and possessions from water damage and ensuring the health of your family. Plumbers are responsible for installing and maintaining drainage systems in homes and businesses. This includes repairing damaged drains and pipes, detecting and locating blockages, and providing regular maintenance to keep your drainage system working as it should.

Plumbing is a skilled trade that requires manual dexterity and coordination, as well as analytical thinking and problem-solving skills. It’s also a physically demanding job that involves lifting heavy objects and working in awkward positions. While some plumbing jobs can be done remotely, others require the plumber to be on-site to install or repair piping and fixtures. This can make it difficult to balance a work life with a family or other commitments.

The majority of a plumber’s work is focused on residential and commercial properties, though they may also be called to work on industrial sites or government facilities. These jobs tend to be more complex than standard plumbing services and may involve specialised equipment or large-scale projects. Plumbers working on these types of projects often need to consult with engineers and other tradespeople to ensure that the plumbing is installed correctly and meets all relevant regulations.

When it comes to identifying and solving plumbing issues, plumbers use a wide range of tools and techniques. These include using specialised drain cleaning equipment, such as augers and hydro jets; testing water pressure and flow rates; locating leaks; repairing or replacing damaged pipework; and installing new fixtures and appliances, such as toilets and showers. In some cases, plumbers may need to dig up and replace entire sections of piping.

For larger plumbing installations, plumbers typically work with builders and other construction professionals to create and lay out piping systems before the concrete is poured. This prep work can help ensure that the finished plumbing system is watertight and structurally sound. It can also save time and money in the long run by avoiding costly repairs later on.

One of the most common services plumbers provide is the installation of sink garbage disposal units. These handy appliances grind food waste and flush it into the plumbing system, where it’s broken down into smaller pieces that can be easily disposed of. Kitchen sink disposal units, such as the InSinkErator models, are easy for plumbers to install. Plumbers can also install bathroom garbage disposal units, known as macerators. These toilet and sink attachments break down food waste and transfer the particles into the main drain line using fast-rotating blades.

Although a garbage disposal unit can handle most types of food waste, it is not meant to take on stringy, fibrous foods like celery, asparagus, corn husks and banana peels, which can wrap around the unit’s blade and dull it. Cooking grease, coffee grounds and eggshells can also clog a disposal. Other no-nos include starchy foods like rice, potatoes and pasta, which expand in hot water. Fats, such as butter, shortening and lard, can also jam a disposal and cause foul odors.

Another way to avoid clogs and keep your disposal in good working order is to use it sparingly. Even traces of food left on plates after eating can cause the appliance to grind and jam. It’s also a good idea to run cold water as the disposal operates, which will help to dissolve any leftover grease and clean the blades and interior of the machine.

Many people are unaware that their plumbing system also handles sewage. A plumber can help you determine if your home is in need of a septic tank or sewer system, and install the necessary components if required. A septic tank is a large, underground tank that holds wastewater and solid waste until it’s pumped out and taken to a processing plant. The tank is usually made of reinforced concrete or fiberglass, and may be lined with an impermeable membrane to prevent contamination.

Alternatively, your home may be connected to the municipal sewer system, which takes wastewater and solid waste to a processing plant. This process removes contaminants such as phosphorus and nitrogen, then disinfects the remaining water before it’s discharged back into the environment. Plumbers can install pumps and other equipment to connect homes to the city sewer system.

Many buildings use a hot water tank or cylinder for providing hot water. Plumbers can install, repair, and service these systems. They can also make recommendations about the best type of system for a home or business based on usage requirements and cost. For example, a plumber might recommend a pressurized hot water system for homes or commercial premises that require high levels of hot water, as these offer significant energy and space savings over time compared to traditional tanks.

Plumbers can also help prevent scalding injuries by making sure that the temperature of the hot water flowing from a shower or tap is not too high. They can do this by ensuring that the hot water pipework is properly insulated. In addition, plumbers can install recirculation pumps in hot water systems to minimise heat loss and maximise energy efficiency. They can also advise about the EPA’s WaterSense new home specification, which can help households save up to 20% in water usage.

Plumbing Services

How to Avoid Plumbing Installation Problems

Plumbing is the system of pipes and fixtures that provide a safe and reliable water supply and remove waste. Plumbers Medina is regulated by laws and codes that ensure safety and quality.

The plumbing in your home starts with large pipes that carry city water from a main line in the street to each house. Then, the pipes branch off to connect to your appliances and drains.


Water supply lines are responsible for transporting fresh water from the main line to sinks, toilets, showers, and other plumbing fixtures. They’re essential for delivering clean, safe, and reliable water to homes and buildings. However, supply lines can be prone to issues such as low water pressure and leaks if they’re not installed correctly. To avoid these problems, follow the guidelines below when installing or repairing plumbing supply lines:

Properly sized water supply lines are critical to maximizing your plumbing system’s performance and longevity. Undersized lines restrict water flow, leading to low water pressure at your plumbing fixtures and causing excess stress on your pipes. This can result in weakened joints and leaks. By following sizing guidelines and hiring a professional to perform accurate measurements, you can ensure your supply lines are properly sized for your plumbing needs.

Different fixture types and areas may require varying supply line sizes to achieve optimal performance. This is especially true for high-demand appliances, like water heaters and washing machines. Properly sized supply lines ensure even and consistent water flow, helping your plumbing system save energy and improve performance.

Plumbing pipe comes in a variety of shapes, sizes, and materials to suit specific applications. The best choice for your project depends on a number of factors, including physical conditions, local codes, and your client’s preferences and budget. For instance, if you’re working on a residential plumbing installation or replacement job, you might prefer to use copper over PVC or PEX because it’s more durable and cost-effective. On the other hand, if you’re building a commercial plumbing project, it may be more practical to use flexible stainless steel piping because it’s easier to install and maintain.

Once you’ve chosen your plumbing pipe, it’s important to follow proper installation techniques to create a watertight seal. For example, you should always use thread tape rather than pipe dope when connecting a valve to a supply line. This is because pipe dope can melt or crack, while thread tape is designed to hold securely in place even when subjected to vibrations and temperature fluctuations.

The drain lines in your home carry wastewater and solid waste away from plumbing fixtures to the main sewer line or septic system. These lines are buried beneath your house, and they’re usually out of sight and mind until they’re clogged or damaged. Fortunately, understanding what can go wrong with your drain lines can help you prevent costly problems and keep them running smoothly.

A residential plumbing system typically has two types of drain lines: the main line and the branch line. A main drain line carries all household wastewater from toilets, bathtubs, showers, sinks and laundry appliances to the sewer line. Depending on where your home is located, the line may connect to a city sewer main or a private septic tank. A clogged main drain can lead to messy, toxic sewage backups in your home, so it’s important to recognize the warning signs and call a plumber when they appear.

During a new plumbing installation, the plumbing contractor sets all the pipes that are needed for supply and drainage systems before framing any walls or installing flooring. This includes rough-in drain fittings for bathtubs and showers, as well as sink and toilet flanges. Fixtures like toilets and showers are set to be installed last after the wall frames have been hung.

All drain lines must be sloped properly to ensure proper drainage and a tight seal. The ideal slope is 1/4 inch for every foot of pipe length. If your drain lines are not sloped correctly, they can clog frequently. This can lead to the use of harsh chemical drain cleaners or frequent calls to your local plumber for unclogging services.

All drain lines should also have a water barrier or trap in place. These are called “p-traps” and they’re typically made of PVC or ABS plastic. The water in the trap acts as a seal that keeps sewer gases and other unpleasant odors from entering your home. The maximum distance a drain line can run from a fixture to the trap is 48″. If a longer distance is used, the force of the wastewater could displace the water in the trap and allow sewer gas into your home.

Your home’s plumbing system is designed to remove water and waste efficiently. Its drainage and vent functions work together to make this happen. The drainage pipes carry waste away from your home to the city sewer line or septic tank, while the vent lines ensure fresh air gets into the drain pipes so that waste can move freely. The ventilation system is vital to preventing a buildup of water and sewer gases that could otherwise be dangerous for your family.

When a home’s vent piping becomes clogged, it can lead to slow-draining fixtures and foul odors. It can also cause gurgling sounds from drains and toilets. If you’re experiencing any of these issues, your vent piping may need to be replaced. To learn more about the function and importance of this sensitive part of your plumbing system, read on.

The vent lines in a plumbing system play an important role in keeping your drains flowing smoothly and protecting your family from hazardous fumes. When installed properly by a professional plumbing service company, the vents strike a balance between negative and positive air pressure to protect the trap seals in your plumbing drains. If negative pressure occurs, the air from the vent will enter the drainage pipe and break the siphon effect. This will prevent the p-trap from filling with wastewater and allowing sewer gas into the home.

However, if the p-trap is filled with water or the ventilation system has been installed incorrectly, it will not be possible to maintain this balance and the vents may become blocked. The best way to avoid this issue is to always hire a professional plumber for any installation or repairs to your plumbing vents.

When installing a new plumbing vent, be sure to follow local and state codes to ensure that your home is protected from future plumbing problems. Also, be sure to use the proper sized pipe for each vent so that it can easily carry waste and prevent a vacuum that could cause blockages or leaks. After installing the vent, it’s important to make sure that all of the seams are sealed and a weatherproof flashing is installed over the top to keep moisture from leaking into your home.

Whether you’re looking to upgrade your existing plumbing fixtures or install a new bathroom, kitchen, or laundry room, the right fixtures will ensure an adequate water supply and proper drainage. However, with so many options available, it can be difficult to choose the best fixtures for your needs. Before making a purchase, consider factors like energy efficiency and performance to help you select the perfect fixtures for your home.

A fixture is any device connected to a plumbing system that serves a specific purpose. Common examples include sinks, bathtubs, toilets, and showers. The pipes attached to these devices carry both water and wastewater, so it’s important that they are properly installed and inspected.

Plumbing fixtures are an essential part of any building, as they provide a means of accessing freshwater and removing waste. They’re also crucial for ensuring that buildings remain hygienic and safe. Without these systems, it would be impossible to get clean water or dispose of waste effectively.

The most common type of plumbing fixture is a sink. These are usually located in the kitchen, bathroom, or laundry room. They have a faucet that allows you to control the flow of water, and they’re also connected to a drain that carries wastewater away from the fixture.

Toilets are another important plumbing fixture, as they serve a vital function in the removal of human waste. These are typically connected to sewer or septic systems, and they use a special valve that prevents wastewater from backing up into the home’s interior.

When choosing a toilet, it’s important to consider the water efficiency and flushing capabilities of different models. It’s also important to consider any specific needs or preferences you may have, such as a low-flow model that can help reduce your water usage.

While it’s possible to paint plumbing fixtures, it’s not recommended. This is because the finish will likely wear off quickly due to constant exposure to water and moisture. Furthermore, you should only use a high-quality paint that is designed for use on plumbing fixtures.

When installing plumbing fixtures, it’s important to keep in mind that they must be CSA-approved. This is because they’re required to meet a set of standards established by the Canadian Standards Association (CSA). This includes requirements for safety, quality, and performance.

Plumbing Services

How to Repair a Faucet

Many faucet problems stem from sediment and mineral buildup, which can corrode the valve seat. In cartridge-type faucets, loose or damaged O-rings and a worn inlet or outlet seal can also cause leaks.

faucet repair

First, shut off the water. Next, remove the decorative cap from each handle using a flathead screwdriver. Once the screw is removed, place the parts in order they were removed so you can easily reassemble them. For professional help, contact Local Law 152.

Leaks are often the result of a damaged component. Rubber washers, o-rings, and gaskets are inexpensive and relatively simple to replace. Cartridges and valve seats may require a bit more effort, but they are also affordable options for restoring a faucet. Disc cartridges are harder to diagnose and replace, but once you’ve removed the old one you can often take it with you to the home improvement store for a replacement.

Faucets are subject to many different kinds of damage over time. This is mostly due to wear and tear, but sometimes the cause is more dramatic. Unusually high or low water pressure can cause the internal parts of a faucet to wear out faster than normal, causing leaks and other problems. A faucet can also be damaged by misuse or abuse, including rough handling, over-tightening of handles, and water pressure too high for the fixture.

The best way to address these problems is to start by making sure the shutoff valves beneath the sink are fully open. Then remove the handle using a screwdriver and examine the interior components for signs of wear and tear or damage. Once the handle is removed you should be able to see a cam-nut or adjustable ring (also known as a ring cap) underneath the faucet that holds the stem or cartridge in place. If the nut is loose or missing altogether, tighten it with needle-nosed pliers. If there’s a problem with the cartridge or stem, unscrew the cam-nut or adjuster ring and unscrew the plastic cam and packer to remove the cartridge and see what needs to be replaced.

If you’re replacing a cartridge, take the old one with you to the hardware store to ensure you get the right replacement. It’s also a good idea to replace the O-ring that is usually found under the cartridge, since it can easily wear out too. Make sure you coat the new O-ring with plumbers grease to prevent it from leaking or burning up on contact with hot water.

If a new seal doesn’t fix the leak, you can try tightening the valve seat with a wrench or o-ring spanner to see if that fixes it. If the faucet is corroded beyond repair or you’re looking to upgrade its features, consider replacing it entirely. A new faucet that’s more efficient will save you money and will last longer than the original, even with constant use.


The first step in faucet repair is to locate the leak. Look for water leaking from around the base of the handle or where the handles connect to the stem. In some cases, a loose screw or worn O-ring may be the cause of the leak. Simply tightening the screw or replacing the O-ring should stop the leaking.

Another common cause of leaking is a dirty valve seat. Over time, minerals in the tap water build up and deposit on the valve seat, causing a leak. Pouring white vinegar over the valve seat and then scrubbing it should help clean it. If a DIYer is unable to fix the problem, it’s best to call in a plumber.

If the faucet leaks at certain times of day or when specific tasks are undertaken, it could be due to changes in water pressure. In this case, the excess pressure is preventing water from flowing away properly and it backs up into faucets and other parts of the house. An experienced plumber can test the water pressure and determine if it’s too high.

Once a homeowner has replaced the damaged parts and cleaned the rest of the sink, they’re ready to reassemble their faucet. It’s important that the replacement parts are an exact match to prevent a new leak from occurring in the future. The order of assembly is washer/O-ring, stem, packing nut, screw and handle. Once reassembled, it’s essential to turn the water supply back on and check for any additional leaks.

When a dripping faucet can send up to three gallons of water down the drain every day, it’s not something that should be ignored. If a DIYer is unable or unwilling to solve the issue, it’s best to call in seasoned professional plumber to do so. The Frontdoor app makes finding the right Pro fast and easy, with real-time chat for advice on home repairs or maintenance and a list of vetted local experts who can make the fixes. Get started with a free quote. Just download the app, snap a picture of your faucet and enter some basic information to receive custom estimates from nearby Pros.

Cartridge Replacement

One of the most common problems in cartridge faucets is worn-out cartridges and O-rings. These parts can become corroded or coated with hard water mineral deposits, which can lead to leaking and difficult turning of the handle(s). Replacing these parts usually fixes these issues. To replace a cartridge, first shut off the water to the faucet by turning the valve(s) clockwise. Then, remove the handle(s). This might require the use of a hex wrench, which may be included in a faucet repair kit. Once the handle is removed, you can see and reach the cartridge retaining nut. If you do not have a hex wrench, use channel-type pliers to turn the retaining nut counterclockwise until it is loose and removed. After removing the retaining nut, carefully pull the cartridge straight up to remove it from the faucet body.

Some faucets have a clip that holds the cartridge in place. If yours does, use a flat-blade screwdriver to pry the clip away from its retention slot. This will reveal two plastic tabs on the cartridge that must be precisely aligned with the corresponding notches or slots in the new cartridge to ensure a tight fit. The white plastic tool that comes with most faucet kits has a square top that will fit neatly over the cartridge stem to help you grasp it and pull it out.

Once you’ve loosened the cartridge and removed it, take the new replacement and install it in the faucet by slipping it into its slot(s). Make sure the notches in the cartridge match the corresponding notches on the sleeve. If the sleeve does not fit tightly, it will leak. If you installed the cartridge correctly, it should click into place and be snug.

Once the new cartridge is in, put the retaining nut back on and reattach the handle(s). Replace the decorative collar (if present) and screw the handle(s) on. Open the water valve(s) and test the faucet for proper operation. If any other parts need replacing, do so now. They don’t make faucets like they used to, but replacement parts are available for most brands and styles at hardware stores, home centers and plumbing supply centers. If you’re unsure what type of faucet you have, it is best to shut off the water and disassemble the fixture before buying replacement parts. This will assure a perfect fit and help you avoid expensive mistakes.

Handle Replacement

Replacing the faucet handle is an inexpensive, straightforward way to update the look of a bathroom. It also can be a troubleshooting step when a cartridge has been replaced and the handle is still leaking or difficult to turn.

Before attempting to replace the handle, turn off the water supply valves beneath the sink. Look under the sink for these valves, which typically are located on either side of the faucet cartridge, and close them by turning the knobs clockwise to shut off the water flow. This will help prevent scalding injuries and ensure that any work you do will not affect the water in your home.

Shut off the water supply at the house shutoff valves, too, if your faucet is a single-handle model that doesn’t have separate shut-offs for each hot and cold. Whether you’re working on a double- or single-handled faucet, it’s essential to shut off the water so that you don’t accidentally damage any components while trying to fix the leaky one.

Examine the faucet handle to determine how it is secured to the cartridge and faucet baseplate. Many lever handles have a set screw under the curve of the handle; others have a decorative cap on the top of the handle that you must remove to access the handle setscrew. Use a flathead or Phillips-head screwdriver to remove the cap and reveal the handle setscrew underneath.

Once you’ve removed the handle, pry off the cover plate and unscrew the retaining screw at the base of the handle with an Allen wrench. You may want to label the retaining screw with a small piece of tape, such as “cartridge” or “handle,” so that you don’t lose it while installing the new handle.

Remove the handle securing screw and the handle from the faucet, then slip the replacement onto the handle and secure it with the retaining screw. Replace the handle cover plate and screw the handle back into place, ensuring that it snaps into place.

Replace the cartridge, if necessary. Make sure the new cartridge is the same type as the old one, and that it fits the cartridge holder’s hole. You may have to loosen the nut on the end of the stem in order to insert the new one, so have a set of needle-nose pliers handy to keep from scratching the spout and valve assembly with the tip of your pliers.

Plumbing Services

What Is Plumbing?

Plumbing is a system that brings freshwater in and takes waste water out. It uses pipes, valves, fittings and fixtures to distribute water throughout a building. It also involves the installation of drainage systems to remove sewage and other waste materials.


Plumbers must have a wide range of skills and knowledge to perform their job duties. They must also be aware of changing industry practices and regulations. To learn more, visit

The plumbing industry is responsible for the distribution and management of water in buildings. This includes the supply of clean drinking water and the removal of waste water and sewage. The plumbing system is an integral part of every building, and efficient systems are crucial to human health and wellbeing. Without proper plumbing, people would face a range of problems, from water contamination and unsanitary conditions to flooding and damage to property. Regular maintenance and repair work can help ensure that plumbing systems operate as they should.

The supply plumbing system consists of pipes, valves, fixtures and appliances that provide clean, potable water to a building’s occupants. It is also responsible for removing waste and sewage, which is collected in drains and sewerage systems and transported away for safe disposal. Plumbing systems also include fire protection plumbing, which comprises pipes and devices that convey water used for fire fighting purposes.

Plumbing technology has advanced significantly over the years, with modern systems incorporating plastic and other durable materials that are resistant to corrosion. In addition, new innovations such as water heaters and smart plumbing systems are helping to reduce energy consumption and improve efficiency.

Plumbers use a variety of tools and equipment to install, repair and maintain plumbing systems. Some of the most common tools are wrenches, pliers, screwdrivers, pipe cutters, soldering irons, and tape. Some more specialized tools include video cameras for inspections, hydro jets for drain cleaning, and steel cable for trenchless sewer line replacement.

While the responsibilities of a plumber can vary depending on the job, all plumbers must adhere to strict health and safety standards. This is because they often work with dangerous chemicals and high-pressure systems. Additionally, they may be exposed to harmful bacteria and viruses. To protect themselves, plumbers must wear protective clothing and follow all safety procedures when working on a project.

The demand for plumbers is expected to continue growing as the population continues to grow and the need for safe, clean water increases. The work can be stressful and physically demanding, but it also provides a good salary and career prospects. Many plumbers choose to become self-employed, allowing them to have more control over their schedule and choice of projects. However, this option comes with more risks and requires a lot of hard work and dedication.


Drainage is the system of pipes that take water away from your house. It is a separate system from plumbing, which brings fresh water in from the supply line and takes waste water away through your toilets, baths and sinks. It is essential to have good drainage because standing water breeds disease-causing bacteria. There are different kinds of drains: stormwater drains (also known as surface drains) and sewer drains. The latter carry sewage, industrial waste and household rubbish to the sewage treatment plant. Most homes have separate drain connections for rainwater and wastewater, but if these are mixed, they could cause pollution.

A drainage system can be designed to prevent erosion on steep terrain, and it can help protect the foundations of houses, roads and walkways from damage caused by excessive moisture. It can also reduce the likelihood of wet basements and damp walls, as well as prevent heave and frost damage to concrete structures.

The best material for drainage systems is plastic pipe, which is inexpensive, long-lasting and durable. It can be made into various shapes to meet the needs of your project.

Other factors to consider when selecting a drainage system include:

The type of soil in your area; the natural percolation rate of the soil; and the slope of the terrain. Having an idea of the nature of the water in your area will also be important, because corrosive and rough water can damage a drainage system. Similarly, the type of construction in your area should be taken into account. For example, the use of roofs and pavement can prevent natural infiltration, so it is best to avoid these materials.


Plumbing fixtures are the appliances that deliver water for use, handle waste and help ensure proper sanitation in a home or business. These fixtures are usually made of durable materials, and they can be installed in a variety of locations. Typically, they are found in the bathroom and kitchen. The most common types of plumbing fixtures include sinks, faucets, toilets, tubs, and showers. These devices vary in size and style, but they all serve a similar purpose.

When selecting plumbing fixtures, it is important to consider your budget and lifestyle. There are a wide range of options available at different price points, so you can find the perfect fixtures for your needs. It is also a good idea to consult with a reputable design professional before making any final decisions. This will help you avoid costly mistakes and ensure that your new plumbing fixtures are up to code.

Fixtures are designed with a specific function in mind. For example, sinks are used for washing hands and dishes, while bathtubs and showers are used for bathing. They are also commonly found in kitchens, where they provide water for cooking and cleaning. Many fixtures are also equipped with mechanisms that allow them to conserve water. For example, some showerheads are designed to minimize splashing, while others are fitted with aerators that reduce water consumption without sacrificing performance.

One of the most critical functions of a plumbing fixture is to prevent the accumulation of waste and debris in the drain pipes. This is done by using a trap that covers the drain opening. Traps are available in a wide variety of shapes and sizes, and they can be installed in a number of places, including beneath sinks, behind toilets, and inside walls. It is also a good idea to have a backflow preventer installed in the main line, which will prevent water from flowing back into the supply lines if there is a problem with the fixture.

In addition to traps, other important plumbing fixtures include water heaters, garbage disposals, and steam radiators. Garbage disposals are important for disposing of food scraps and other waste, and they should be disposed of regularly. Steam radiators are an efficient way to heat a home, and they can be fitted with thermostatic valves that control the temperature of the water.


Plumbing is a vital part of every home and needs to be in good working order at all times. A leaking faucet, clogged drain or running toilet can lead to costly water damage if not repaired promptly. Fortunately, there are steps that can be taken to troubleshoot and repair these problems on your own without calling in a professional plumber.

The first step in identifying and fixing plumbing problems is turning off the water supply to the affected area. This can be done by turning off the main water valve located underneath sinks or in the basement of your home. This will prevent any further water damage until the problem can be addressed. Next, listen for dripping sounds. While this may seem insignificant, a single dripping faucet can lead to thousands of drops and gallons of wasted water over the course of a day. This can quickly add up and result in high water bills.

Another common plumbing problem is slow or clogged drains. These can be caused by hair, soap scum and other detritus that collects in the drain over time or by an excessive amount of water usage. In most cases, these problems can be resolved by performing a drain cleaning or simply monitoring your household water usage to identify possible causes.

If you have multiple clogged or slow drains, it is a good idea to call a plumber to perform a professional inspection of the sewer line. Clogged sewer lines can cause a backup of sewage into your home, which is both dangerous and unsanitary. This problem can also be difficult to diagnose as it often takes a long time for the sewage to back up into your home, and most people only notice it when they flush the toilet.

A plumber is a skilled tradesperson that can install and repair systems used for potable water, sewage and drainage in residential and commercial buildings. Plumbing is a complex job that requires attention to detail, knowledge of safety precautions and tools, and the ability to work under pressure. It is important for consumers to understand the basics of plumbing so that they can recognize when it is time to call a professional plumber.

Plumbing Services

Becoming a Plumber

Plumber Northridge deals with everything from clogged drains and sewer lines to repairing showers, toilets and sinks. They are the first trade workers homeowners or building managers turn to when they have plumbing problems.


A career as a Plumber can be rewarding and challenging. Most plumbers enter the field through apprenticeship programs that combine classroom instruction with paid on-the-job training.

Most people don’t grow up dreaming about becoming a plumber, but it is an excellent career choice for those who are self-motivated and interested in working with their hands. There are several routes to a plumbing career, including earning a diploma from a vocational school or completing an apprenticeship program. Many of these programs offer both classroom and practical training, which is ideal for gaining the experience needed to become a licensed plumber.

Plumbers install and repair water lines, septic systems, fixtures, and appliances. They also work with construction teams to ensure plumbing is installed properly during building projects. In addition, plumbers often spend time outside of the workplace addressing plumbing emergencies, such as sewer backups or burst pipes. Depending on the specific field in which they specialize, plumbers may need additional training or certification to work with certain materials or on complicated jobs.

The first step to becoming a plumber is completing a formal apprenticeship program. The length of an apprenticeship varies, but most offer between two and five years of on-the-job and in-school training. During this time, apprentices will learn about plumbing systems, pipefitting, welding, blueprint reading, safety protocols, and more. Upon completion of the apprenticeship, plumbers will need to pass an exam in order to obtain their journeyman license.

In addition to formal apprenticeships, there are a number of vocational schools that offer comprehensive plumbing training. These programs typically combine classroom instruction with practical experience, and they often result in a certificate or associate degree. These degrees can help a plumber find employment and advance in their careers.

While there are no high school courses specifically tailored for becoming a plumber, there are a number of subjects that can be helpful. Math classes, particularly algebra and geometry, can improve a plumber’s ability to measure and calculate, while science courses, like chemistry and physics, can provide valuable knowledge about the physical properties of various materials used in plumbing tasks.

In most jurisdictions, plumbers must have a high school diploma or equivalent in order to begin an apprenticeship or attend a trade school. Some apprentices choose to earn their degrees through community college or university programs, and this option can reduce the amount of time required to complete their apprenticeships.

Licenses and Permits

Plumbing licenses are required by many states. Some require a minimum number of hours of experience and others have specific exam requirements. There may also be licensing fees, which can vary by state. Plumbers are required to have general liability insurance, which protects them against damages and injuries occurring while working on a job.

To become a licensed plumber, you must complete an apprenticeship program. This usually takes two to three years and consists of classroom instruction, laboratory work and practical experience. Some programs offer financial aid for apprentices who qualify. After completing the apprenticeship program, you must pass a state exam. The exam will test your knowledge of the latest code requirements for your area.

In New York, the licensing process for plumbers varies by city and county. However, the state passed a uniform building code in 2020, which makes it easier for plumbers to transfer their skills from one location to another.

The qualifications you must meet to obtain your plumber’s license depend on where you live and whether you work in commercial or residential settings. For example, to obtain a master plumber’s license in New York, you must have two years of experience performing installation, maintenance or repair of plumbing systems and can substitute directly related academic or technical training for one-half of that experience. You must also pass a trade exam and a business and law exam.

Applicants must also submit character references, educational and work history documents and pass background checks. Affidavits from your past and present plumbing employers must certify your experience and moral character. The affidavits must be signed and notarized and must include your social security number. You will also need to provide an affidavit stating you are not currently incarcerated or on parole for a felony conviction.

Some states, such as Rhode Island and New Mexico, have separate licensure requirements for residential and commercial plumbers. Other states, such as Wyoming, have no statewide licensing requirements, but local communities might have stipulations for plumbers. To find out the stipulations in your area, check with local plumbers.

Work Environment

Plumbers often work in a variety of settings, from residential homes to commercial and industrial facilities. They must be able to work in tight spaces, deal with unexpected challenges, and perform physically demanding tasks. In addition, plumbers often work with hazardous materials and are exposed to extreme temperatures. Therefore, they need to be aware of the potential risks associated with their jobs and follow appropriate safety precautions.

Many plumbers are self-employed, which gives them greater control over their work schedules and projects. This flexibility also makes it easier for them to handle emergency situations. Nevertheless, this type of career can be difficult to balance with other obligations. For example, a plumber may be required to work evenings or weekends, and they must be available on call when emergencies arise. In addition, plumbers can become fatigued from repeated physical activity and awkward positions.

Working as a plumber can be very rewarding. This career offers a good salary and stability, and it provides an opportunity to help people in need. Moreover, plumbers can also choose to work as independent contractors or start their own businesses. Plumbers should be prepared for the challenging work environment, and they should have excellent problem-solving skills to address a wide range of issues.

Installing Plumbing Systems

During the installation of plumbing systems, plumbers must interpret blueprints and building codes to ensure that installations are done properly. They are also responsible for obtaining necessary permits and inspections. In addition, they must be able to diagnose and repair problems with existing systems such as leaks and clogs.

Other Duties

Plumbers must be able to communicate effectively with customers and provide them with advice on the best plumbing solutions for their homes. This is especially important when addressing issues such as a clogged toilet or broken water heater. They must be able to explain the cause of the problem and describe different ways to fix it. Plumbers also need to be able to estimate costs and timeframes for their projects. Additionally, they should be able to collaborate with other professionals such as architects and construction teams to ensure that plumbing is integrated seamlessly into building projects.


As with most industries, salaries vary widely. Plumbers who are highly skilled can command high salaries. Some states also have higher cost of living, which affects the amount that plumbers can make.

A master plumber in the top 10 percent of earners can expect to make between $63,900 and $82,700 per year. These figures take into account the yearly average of the salary for the position, plus any tips or bonuses that may be associated with the job.

There are several ways for a plumber to increase their pay, from gaining more experience to getting a promotion or starting a plumbing business. Those looking to increase their wages can also consider changing employers or moving to a different state. Some states have apprenticeship programs where apprentices earn at 50 percent of the journeyperson rate, while others have licensing requirements that can increase a plumber’s earnings.

Other factors that can affect a plumber’s salary include the type of work they do. Commercial plumbers, for example, work in larger systems that are designed to accommodate large amounts of water and waste. They may be responsible for installing, maintaining and troubleshooting these systems in settings like schools, hospitals and shopping centers.

Service plumbers, on the other hand, focus on repairing or installing plumbing fixtures and appliances, as well as working with customers to determine their needs and provide advice on solutions. In addition, service plumbers are often required to follow building codes and regulations and obtain necessary permits for projects. This can require a unique set of skills, including excellent customer service, the ability to interpret blueprints and plans, and the ability to understand safety protocols.

Plumbing Services

Common Plumbing Problems And Solutions

Whether it’s a drip, drip, drip in the kitchen sink, or whoosh, whoosh in the toilet, plumbing issues can be disruptive. However, before you call in a plumber, arm yourself with knowledge about the most common plumbing problems and solutions.

Clogged drains and toilets, low water pressure, and leaky faucets are all common household problems that can be fixed fairly easily with the right tools. Call Plumbers in Fayetteville AR right away if you notice some issues with your plumbing.


Clogged Toilets

Your household plumbing system includes drain lines that carry waste and water away from toilets, sinks, tubs, and other fixtures. These drain lines lead to your septic or sewer line, where waste is sucked away into a tank or a municipal sewage system. Clogs in these lines can be caused by wads of flushed material that become stuck in the line, breaks or infiltration from nearby tree roots, or by the simple build-up of waste over time. A clogged toilet can be an annoying, inconvenient problem to deal with, but there are a few things you can try to clear up yourself.

If you’ve tried plunging the toilet and other clog-fighting methods but still can’t get your toilet to drain, it’s probably time to call a professional. A plumber will have more powerful tools to break up and dislodge clogs in the pipes leading into your toilet, your septic tank or sewer line, or anywhere else it might be located.

Most often, a clogged toilet is the result of a rogue piece of toilet paper or other foreign object. It’s important to teach kids and other family members not to flush anything but toilet paper and human waste down the commode, and to dispose of other materials in the trash instead.

Another common cause of clogged toilets is hard water, which can wreak havoc on your plumbing system by leaving behind mineral deposits that calcify over time, narrowing the gap through which waste can flow. If your water is very hard, consider installing a water softener to help prevent clogged toilets.

When you have a clogged toilet, fill the bathtub to about halfway with very hot water (not boiling). Then, pour the hot water into the toilet bowl over the clog. This creates a force of pressure and suction that can sometimes dislodge even stubborn clogs without damaging the porcelain. Another option is to use a drain snake, which you can buy from a hardware store or hire a professional to do for you. Be sure to follow the instructions for using the snake carefully, as a wrong approach can cause serious damage to your home’s pipes.

Clogged Drains

Your pipe and sewer system is designed to transport waste away from your home, but if it becomes blocked this can result in a range of problems. These issues could include slow-draining sinks, clogged toilets, or even an overflowing sewer line. These problems can be caused by a variety of factors, including age, wear and tear, and how often you use your pipes and fixtures.

While some of these issues may be due to normal wear and tear, many can easily be prevented with routine maintenance. For example, by regularly using a drain snake or chemical drain cleaner, you can help keep your pipes clear of hair, soap scum, and food waste.

It is also a good idea to have your drains professionally installed to ensure that they are positioned and configured properly to prevent blockages. While it might seem like a costly service, having your drains professionally installed can save you money in the long run by preventing costly repairs and clogs.

The most common reason for a clogged drain is a build-up of hair, soap scum, and other debris. These items can build up in a variety of locations, such as showers, tubs, and bathroom sinks. For this reason, it is a good idea to install a mesh drain cover in your showers and bathtubs to help reduce the amount of hair that can clog them.

Toilets can also be susceptible to clogs, especially if you have small children who like to flush toys or other objects down the toilet. It is also important to avoid flushing non-flushable objects, such as wipes, paper towels, dental floss, feminine products, and diapers. In addition, it is a good idea to have your toilets regularly serviced to remove any clog-causing residue.

Another cause of clogged drains is tree roots. Over time, a small crack or hole in your drain pipe can allow tree roots to enter the system and create blockages. To prevent this, it is important to keep your landscaping well-maintained and ensure that trees are not too close to your house.

Sewer Backups

Sewage backups are one of the worst problems that can plague homeowners, and it’s not just because of the nasty smell. Raw sewage contains dangerous bacteria that can cause a host of illnesses, including gastroenteritis and hepatitis A. If you’re experiencing a sewer backup, it’s important to shut off your home’s water supply and contact a plumber right away.

A clogged toilet can be due to simple things like flushing too much toilet paper or cooking grease, but a blocked sewer line is usually a bigger issue that requires more extensive repairs. Depending on the type of blockage, it may be necessary to dig up and replace parts of your home’s plumbing system.

You can prevent a lot of sewer issues by having your pipes inspected regularly and making sure to only flush human waste, toilet paper, and products labeled as “flushable.” Even so, many homeowners end up with a sewer backup at some point.

Several things can cause a broken or clogged sewer line, including tree roots, ground movement, and poor construction. Older homes often have cast iron or clay pipes that can crack or break over time. These pipes don’t last as long as plastic sewer lines, which are becoming the standard in newer homes.

Another common problem is a damaged or misaligned lateral pipe that connects the main sewer line to your house. These are typically installed without proper support, which can lead to wear and tear over time and even collapse. If you’ve noticed sinkholes, lush spots, or pooling water in your yard, it could be an indicator that your lateral pipe has become disconnected from the main sewer line and is filling with dirt.

The best way to avoid a costly repair bill is to have your sewer line replaced with new, durable lines. While it’s not an easy or cheap project, the peace of mind that comes with knowing you’re protected against a messy, expensive backup is well worth the investment. You’ll also save money in the long run by avoiding costly damage to your entire plumbing system.

Leaky Faucets

The best way to avoid this problem is to keep an eye on your faucets and pipes for leaks. This can be done by observing moisture or wet spots on the floor, wall, or under sinks, as well as by listening for drip-drip-drip from faucets.

Over time, the seals that hold water in your pipes can degrade or break down, causing them to leak. This can occur from natural wear and tear, age-related damage, or even from pressure fluctuations. Eventually, you’ll start to notice moisture problems in the form of damp or moldy walls or floors, as well as higher-than-usual utility bills.

Leaking faucets are a common household issue that’s easy to fix. If left untreated, however, they can lead to costly water damage and increase your water bill significantly. To avoid this, be sure to regularly check for wet spots or puddles on the floor or under sinks, and look for signs of leaking such as rusting, discoloration, or visible mildew and mold.

One of the most common causes of a leaky faucet is worn-out washers that no longer form a tight seal against the valve seat. This can be caused by tearing, dislodging, or stiffening over time, and it’s important to replace the washer as soon as you notice any signs of wear and tear.

Other common causes of leaking faucets include the inlet and outlet seals, which can be corroded by water sediments or worn out from continuous use. This can be caused by the wrong type or size of the washer being used, improper installation, or a lack of regular maintenance.

If you suspect that you have a leaking faucet, the first thing to do is switch off your water supply at the shut-off valves or your home’s main water pipe. Once this is done, you’ll want to block the drain with a towel or plug. From here, you can determine what kind of faucet you have (cartridge, ball, or ceramic disk) and take the necessary steps to repair it. For cartridge faucets, for example, you’ll need to remove the handle assembly and cut off the old O-rings before replacing them with new ones.