How to Unclog a Clogged Toilet Without Calling a Plumber
If you’ve ever had a clogged toilet, you know that the situation can be pretty unpleasant for you and your family. There are many causes of clogs, from debris to faulty plumbing, and every homeowner wants to have their clogs cleared as soon as possible. To get your drain clear quickly, you should first determine what is causing the sluggish drainage in your toilet, then take steps to remove the obstruction.
The first thing you should do is test the other drains in your bathroom to determine whether they are blocked as well. If one of the drains is not blocked, it may be due to a blockage in the line or a septic system failure. A plunger is an easy solution to unclog a clogged toilet, but if you can’t figure out why the toilet isn’t draining, it’s time to call Plumber West Jordan Utah.
Another option is to use a toilet auger, also known as a snake. Usually a toilet auger is about $20 to $50, you can purchase one at a hardware store or online. Insert the cable of the auger into the toilet’s throat and apply pressure until it is fully extended into the drain pipe. You should feel the auger drop into the drain pipe, but you need to apply extra pressure to make the auger punch through the clog and open the drain so that water can flow out.
If the problem persists, you can try a toilet auger, also known as a snake. The auger costs $20 to $50 at your local hardware store. Once in the toilet, insert the cable through the throat. Then, apply pressure to the cable as it extends into the drain pipe. If it feels too loose, use a plunger to unclog the toilet. If you still can’t solve the sluggish drain, you may need to call a plumber to help you solve your clogged toilet.
If you are unable to find an auger, you can purchase a toilet auger, which is an inexpensive tool. This tool is a great option if you want to try a DIY solution. Unlike a drain snake, an auger requires no tools to be installed. You should simply use a plunger and try it several times until you get the desired results. Alternatively, you can hire a plumber for more advanced work.
Using a toilet auger will help you clear the clog in the toilet, but it should be used with caution because it can scratch the porcelain. Likewise, drain snakes are not recommended as they can scratch the porcelain of a toilet. To use a coat hanger, first insert a v-shaped hook in the end of the cable. Then, engage the hook into the clog and pull gently to release it.
If the toilet has a large amount of sediment and refuses to drain, you can try a snake instead. The snake, or toilet auger, can be purchased for around $20 to $50 from a hardware store. A toilet auger can be purchased from a plumber or from a hardware store. To use an auger, insert a cable through the throat of the sink, and then extend the cable into the drain pipe. You should feel the auger drop into the drain and a hole in the clog will be made, allowing water to flow to the sewer.
A toilet auger, also known as a snake, is an inexpensive tool to unclog a toilet. You can buy one for around $20 to $50 from a hardware store. To use a snake, you need to put the cable into the toilet and apply pressure to it. Once the cable has reached the pipe, you should feel a small hole in the clog, and then proceed to use a plunger.
A snake can be purchased at a hardware store or online. A toilet auger should be used carefully. A hard push can cause a massive air bubble, while a soft push will loosen the clog. It is important to check the toilet drain after using a plunger, as a slow drain could mean a clogged line or a faulty septic system. If the water drains slowly, you should contact a professional immediately.